The Ultimate Shine & Protection

       Here's how to obtain the ultimate shine on a black (or any other color vehicle), and at the same time provide a very durable protective coating (4-6 months on the average).

1. Wash the vehicle with Race Glaze^® L.A.S. Wash, to remove any surface soils and contaminants. This hyper-concentrated wash safely removes all soils, but will not remove our Polish & Sealant.
   Features: Thick/dense foam (even in hard water), streak-free rinsing, Bio-degradable, neutral pH (safe for skin contact), pleasant coconut fragrance.
   
2. Polish the surface with Race Glaze^® Polish & Sealant, using two foam anti-static detail pads.
• Spray a mist of water on a white detail pad (or mist the surface to be polished).
• Put some Polish & Sealant on the white detail pad (shake bottle before dispensing).
• Apply a thin coat of Polish & Sealant to surface, in a lateral (back and forth motion), like you would sand a piece of wood. Work it in well, misting more water as necessary.
• Use the gray detail pad to buff off the Polish & Sealant, and polish the surface to a high shine.

If you develop static, and see polish dust, very lightly mist the gray pad.

3. When finished, keep the pads clean by storing them in zip lock bags.

       To maintain that just polished look, and increase the UV protection, spray/wipe surface as often as you want, with Race Glaze^® Gloss Highlighter. This unique product is more than a typical "quick detail" type of product. It will remove light soils, will polish to a very high luster, and stands up to washes very well (on average 4-6 washes), repels water extremely well. (vehicles left out in the rain, dry very nicely when the sun does come out.)

       If you have any fine surface scratches (finger nail scratches by door handles, tree branch scratches, cat or dog claw scratches, etc.), they may easily be removed by hand, with Race Glaze^® Leveling Compound. To remove them, and polish to a "like new shine", in one step: Apply some Leveling Compound to a clean piece of terry cloth, rub in a lateral motion until dry - takes about 10 secs. Then buff the area with a clean soft cloth. Protect the area with a coat of Race Glaze^® Polish & Sealant, as described above.

       Please call if you have any questions, or would like to order any of our products.

Rich & Jackie Warner

Flitz® Tool For Power Polishing

Copyright © 1998-1999 Shine Enterprises